Embroidered Jam Pot Covers...

Back in the Autumn I made a couple of varieties of chutney as Christmas gifts. Spiced Marrow Chutney and a Tangy Beetroot Chutney using a combination of recipe ideas from this brilliant site. They've been "maturing" since October so should be perfect for the Christmas table by now. The only thing left to do was make them look all Christmassy and add a little personal touch to them; so I opted for some hand embroidered jam pot covers tied with grosgrain ribbon....(I actually had about 12 jars in total but some had already been gifted before I had a chance to take these photos!)

I got all OCD on getting the right size circle for my covers. Just didn't like the idea of cutting a square and trimming it to size once in place. I just KNEW I would screw it up that way. So if anyone else is as mildly obsessive about these things as me here's my method...


I had several sizes of jar so just repeated the process for each different size. Firstly draw round the the lid of the jar on a sheet of paper...

Then find the centre point of the circle by folding it in half lengthwise then across the width. It's actually the circle itself that needs to be folded in half so I held the paper up to the light as I was folding so as to see through it and line the edges of the circle up as I was folding...

Measure the diameter of the circle, let's say this one was 3". Then mark a point the exact same distance, 3", from the centre point, extending out beyond your original circle, on each of the four fold lines...

Then find a plate/bowl/object (or use a compass if you want to be super precise!) and use it to draw a circle that encompasses these four points equally(ish)...

Et voila...Cut out your template(s)....

Because I planned to emroider my covers I cut out heavy weight iron on interfacing the exact same size as my jar lids....

And some squares of fabric (thrifted and upcycled of course!) slightly larger than my templates.....

Place fabric square RS down on the ironing board. Centre the interfacing sticky side down on top of the fabric and press to adhere. Then pin the template on top of this making sure the centre circle of the template lines up with the circle of interfacing....

Cut around the template with pinking shears...

It should look like this...

I then embroidered snowflakes on each cover with embroidery floss. These are a combination of French Knots, Lazy Daisy Stitch, and Back Stitch and took about 15 mins each to do so great as a last minute personal touch...

Secure the covers to the jar tops with elastic bands then tie with ribbon......

There are so many ideas out there for "Gifts in a Jar" and these would add a nice finishing touch to anything in a jar. Not just chutneys  :)
Px

Embroidered Jam Pot Covers...

Back in the Autumn I made a couple of varieties of chutney as Christmas gifts. Spiced Marrow Chutney and a Tangy Beetroot Chutney using a combination of recipe ideas from this brilliant site. They've been "maturing" since October so should be perfect for the Christmas table by now. The only thing left to do was make them look all Christmassy and add a little personal touch to them; so I opted for some hand embroidered jam pot covers tied with grosgrain ribbon....(I actually had about 12 jars in total but some had already been gifted before I had a chance to take these photos!)

I got all OCD on getting the right size circle for my covers. Just didn't like the idea of cutting a square and trimming it to size once in place. I just KNEW I would screw it up that way. So if anyone else is as mildly obsessive about these things as me here's my method...


I had several sizes of jar so just repeated the process for each different size. Firstly draw round the the lid of the jar on a sheet of paper...

Then find the centre point of the circle by folding it in half lengthwise then across the width. It's actually the circle itself that needs to be folded in half so I held the paper up to the light as I was folding so as to see through it and line the edges of the circle up as I was folding...

Measure the diameter of the circle, let's say this one was 3". Then mark a point the exact same distance, 3", from the centre point, extending out beyond your original circle, on each of the four fold lines...

Then find a plate/bowl/object (or use a compass if you want to be super precise!) and use it to draw a circle that encompasses these four points equally(ish)...

Et voila...Cut out your template(s)....

Because I planned to emroider my covers I cut out heavy weight iron on interfacing the exact same size as my jar lids....

And some squares of fabric (thrifted and upcycled of course!) slightly larger than my templates.....

Place fabric square RS down on the ironing board. Centre the interfacing sticky side down on top of the fabric and press to adhere. Then pin the template on top of this making sure the centre circle of the template lines up with the circle of interfacing....

Cut around the template with pinking shears...

It should look like this...

I then embroidered snowflakes on each cover with embroidery floss. These are a combination of French Knots, Lazy Daisy Stitch, and Back Stitch and took about 15 mins each to do so great as a last minute personal touch...

Secure the covers to the jar tops with elastic bands then tie with ribbon......

There are so many ideas out there for "Gifts in a Jar" and these would add a nice finishing touch to anything in a jar. Not just chutneys  :)
Px

Nine Patch Pillow Tutorial

    I made a couple of quick and easy nine patch pillows this week and thought I would share the process.  Pillows make a great gift and, for those of us with too much fabric, are an easy, instant gratification stash buster.
    I had 14 inch pillow forms (on sale for 40% off frequently at Joann's) in my closet so that was the size I was going for but because these include a border you can easily customize them to a larger size.
    Choose some coordinating fabrics (I just used two but you can use up to nine) and cut four 4 1/2 inch blocks out of one and 5 4 1/2 inch blocks out of the other

    .  Lay them out in an alternating pattern and then stack them by row.  I used batiks so both sides are good but if there is a right side/wrong side make sure you sew good sides together.

Then sew the top two in each of the three stacks together in a chain.  My chain has six sewn pairs on it because I was trying to streamline the process by making two pillows at once.

There should be a 1/4 inch seam for all sewing for this project - I used a quarter inch foot but you don't need to.  Most important is that your seam is consistent.  Once you've sewn your blocks snip in between them to separate.

Pick either light or dark and press all the blocks in the same direction (either to dark or to light).  This will make your final pillow neater in appearance and will make lining the grid up easier.

Next, add your third square on each row.  Make sure that you are not sewing the same two squares together.  Press to the same color square you used on the previous step.

 Now take two of your rows (one of each variation) and line them up.  Pin on the seam lines where they join together and at the ends.  This is the one time I pin because you want the seams to match.  Sew together and press.  Add the third row.  If you pressed carefully your wrong side should look as pretty as the right side.

You block should be almost exactly 14 inches at this point.  But pillows are puffy and you need a little extra size for that plumpness.  I added a 2 inch strip around all the sides of mine.  Remember - this doesn't add 2

 inches to the overall side because of the seam allowance.  It makes it about 15 1/2 inches.

After pressing one more time, I like to add a layer of fusible interfacing to the wrong side of the top.  If you are using quilting weight cotton and/or light colors this adds a little body and opaqueness.

Your back consists of two rectangles that will overlap so you can slide the pillow in and out but not see the form.  I made mine 15 1/2 X 10.  I   then

 folded one of the long inches on each rectangle under a rough 1/4 inch on each and sewed - this creates a finished edge. Lay your back pieces right side on top of the right side of the pillow with the finished edge in the middle and pin.  Make sure you remember to remove the hidden pins on the overlap section as you sew!  Sew around the entire edge.  Turn right side out, press and slip in your pillow form.   I'm a slow cutter and sewer and these take me about an hour each and use less than a 1/4 yard of the two front fabrics and less than a 1/2 a yard of the backing.