Christmas Chaos!

Hi all!

I'm Fiona and I have fairly recently started blogging over at Diary of a Chain Stitcher. I never got round to posting about my Christmas Crafting Plans (it's taking me a while to get into the swing of blogging all that regularly especially amongst all the Christmas chaos) but I have been determined to post about what I've been up to!

As I haven't long been crafting I knew attempting to hand make too many of my presents was just going to be pushing myself a little too far and would only result in a horribly stroppy me for the last few days before Christmas which no one would appreciate. So instead I've done a combination of handmade, produced with a lot of thought but not completely made by my hand and shop bought presents. As much as I'd like to give everyone handmade gifts I one don't have enough time and know that my handmade taste is not necessarily everyone's cup of tea.

My main made project was my Stepdad's iPad case (from this tutorial) with fun chemistry related lining! (He works in a lab) I love it because it looks very professional on the outside so he can take it to meetings but inside it's fun and colourful. I got the lining fabric from Spoonflower which I have only just discovered and highly recommend. There are hundreds of prints to choose from, and if you can't find what you want you can get your own design printed up.

I've also made my boyfriend some boxer shorts using a free pattern from BurdaStyle. They were really quick and fun to make so I think he'll be getting some more of those for his birthday! I don't have a picture unfortunately as I wrapped them as soon as I finished to avoid any accidental discoveries. The surprise is one of the best bits of a gift I think!

One of the gifts I'm most proud of is a cookbook I put together for my Mum and Nan filled with our favourite family recipes. It was a big and time consuming job but I really enjoyed it and it was very straightforward to do using the software on Blurb. They have lots of page templates to choose from which you just fill with the photographs and writing you want, press publish and they'll print up as many copies as you want, and speedily too.

I've made the majority of my Christmas Cards by cross stitching festive designs, which I also sell on Etsy. I can't stand how much printed mass produced cards cost in the shops and would much rather make my own which can be tailored to the recipient and the effort is always appreciated much more.

I've made a few Christmas decorations this year too including crackers, a table runner and these stockings:

Finally I've been doing A LOT of baking including some little Christmas boxes of shortbread for family friends who always send me a little something and who I never know what to give. A little discovery for everyone - shortbread holds up very well in the post! And this recipe for orange pastry is a winner!

Ooof writing this post has made me realise I'd actually done a lot more than I thought! Good luck with the last minute crafting everyone! Merry Christmas!

Christmas Chaos!

Hi all!

I'm Fiona and I have fairly recently started blogging over at Diary of a Chain Stitcher. I never got round to posting about my Christmas Crafting Plans (it's taking me a while to get into the swing of blogging all that regularly especially amongst all the Christmas chaos) but I have been determined to post about what I've been up to!

As I haven't long been crafting I knew attempting to hand make too many of my presents was just going to be pushing myself a little too far and would only result in a horribly stroppy me for the last few days before Christmas which no one would appreciate. So instead I've done a combination of handmade, produced with a lot of thought but not completely made by my hand and shop bought presents. As much as I'd like to give everyone handmade gifts I one don't have enough time and know that my handmade taste is not necessarily everyone's cup of tea.

My main made project was my Stepdad's iPad case (from this tutorial) with fun chemistry related lining! (He works in a lab) I love it because it looks very professional on the outside so he can take it to meetings but inside it's fun and colourful. I got the lining fabric from Spoonflower which I have only just discovered and highly recommend. There are hundreds of prints to choose from, and if you can't find what you want you can get your own design printed up.

I've also made my boyfriend some boxer shorts using a free pattern from BurdaStyle. They were really quick and fun to make so I think he'll be getting some more of those for his birthday! I don't have a picture unfortunately as I wrapped them as soon as I finished to avoid any accidental discoveries. The surprise is one of the best bits of a gift I think!

One of the gifts I'm most proud of is a cookbook I put together for my Mum and Nan filled with our favourite family recipes. It was a big and time consuming job but I really enjoyed it and it was very straightforward to do using the software on Blurb. They have lots of page templates to choose from which you just fill with the photographs and writing you want, press publish and they'll print up as many copies as you want, and speedily too.

I've made the majority of my Christmas Cards by cross stitching festive designs, which I also sell on Etsy. I can't stand how much printed mass produced cards cost in the shops and would much rather make my own which can be tailored to the recipient and the effort is always appreciated much more.

I've made a few Christmas decorations this year too including crackers, a table runner and these stockings:

Finally I've been doing A LOT of baking including some little Christmas boxes of shortbread for family friends who always send me a little something and who I never know what to give. A little discovery for everyone - shortbread holds up very well in the post! And this recipe for orange pastry is a winner!

Ooof writing this post has made me realise I'd actually done a lot more than I thought! Good luck with the last minute crafting everyone! Merry Christmas!

Embroidered Jam Pot Covers...

Back in the Autumn I made a couple of varieties of chutney as Christmas gifts. Spiced Marrow Chutney and a Tangy Beetroot Chutney using a combination of recipe ideas from this brilliant site. They've been "maturing" since October so should be perfect for the Christmas table by now. The only thing left to do was make them look all Christmassy and add a little personal touch to them; so I opted for some hand embroidered jam pot covers tied with grosgrain ribbon....(I actually had about 12 jars in total but some had already been gifted before I had a chance to take these photos!)

I got all OCD on getting the right size circle for my covers. Just didn't like the idea of cutting a square and trimming it to size once in place. I just KNEW I would screw it up that way. So if anyone else is as mildly obsessive about these things as me here's my method...


I had several sizes of jar so just repeated the process for each different size. Firstly draw round the the lid of the jar on a sheet of paper...

Then find the centre point of the circle by folding it in half lengthwise then across the width. It's actually the circle itself that needs to be folded in half so I held the paper up to the light as I was folding so as to see through it and line the edges of the circle up as I was folding...

Measure the diameter of the circle, let's say this one was 3". Then mark a point the exact same distance, 3", from the centre point, extending out beyond your original circle, on each of the four fold lines...

Then find a plate/bowl/object (or use a compass if you want to be super precise!) and use it to draw a circle that encompasses these four points equally(ish)...

Et voila...Cut out your template(s)....

Because I planned to emroider my covers I cut out heavy weight iron on interfacing the exact same size as my jar lids....

And some squares of fabric (thrifted and upcycled of course!) slightly larger than my templates.....

Place fabric square RS down on the ironing board. Centre the interfacing sticky side down on top of the fabric and press to adhere. Then pin the template on top of this making sure the centre circle of the template lines up with the circle of interfacing....

Cut around the template with pinking shears...

It should look like this...

I then embroidered snowflakes on each cover with embroidery floss. These are a combination of French Knots, Lazy Daisy Stitch, and Back Stitch and took about 15 mins each to do so great as a last minute personal touch...

Secure the covers to the jar tops with elastic bands then tie with ribbon......

There are so many ideas out there for "Gifts in a Jar" and these would add a nice finishing touch to anything in a jar. Not just chutneys  :)
Px

Embroidered Jam Pot Covers...

Back in the Autumn I made a couple of varieties of chutney as Christmas gifts. Spiced Marrow Chutney and a Tangy Beetroot Chutney using a combination of recipe ideas from this brilliant site. They've been "maturing" since October so should be perfect for the Christmas table by now. The only thing left to do was make them look all Christmassy and add a little personal touch to them; so I opted for some hand embroidered jam pot covers tied with grosgrain ribbon....(I actually had about 12 jars in total but some had already been gifted before I had a chance to take these photos!)

I got all OCD on getting the right size circle for my covers. Just didn't like the idea of cutting a square and trimming it to size once in place. I just KNEW I would screw it up that way. So if anyone else is as mildly obsessive about these things as me here's my method...


I had several sizes of jar so just repeated the process for each different size. Firstly draw round the the lid of the jar on a sheet of paper...

Then find the centre point of the circle by folding it in half lengthwise then across the width. It's actually the circle itself that needs to be folded in half so I held the paper up to the light as I was folding so as to see through it and line the edges of the circle up as I was folding...

Measure the diameter of the circle, let's say this one was 3". Then mark a point the exact same distance, 3", from the centre point, extending out beyond your original circle, on each of the four fold lines...

Then find a plate/bowl/object (or use a compass if you want to be super precise!) and use it to draw a circle that encompasses these four points equally(ish)...

Et voila...Cut out your template(s)....

Because I planned to emroider my covers I cut out heavy weight iron on interfacing the exact same size as my jar lids....

And some squares of fabric (thrifted and upcycled of course!) slightly larger than my templates.....

Place fabric square RS down on the ironing board. Centre the interfacing sticky side down on top of the fabric and press to adhere. Then pin the template on top of this making sure the centre circle of the template lines up with the circle of interfacing....

Cut around the template with pinking shears...

It should look like this...

I then embroidered snowflakes on each cover with embroidery floss. These are a combination of French Knots, Lazy Daisy Stitch, and Back Stitch and took about 15 mins each to do so great as a last minute personal touch...

Secure the covers to the jar tops with elastic bands then tie with ribbon......

There are so many ideas out there for "Gifts in a Jar" and these would add a nice finishing touch to anything in a jar. Not just chutneys  :)
Px

Crochet hook tutorial

Hello, it's Wendy from The Crafter's Apprentice again.  Are you ready for another tutorial?  This crochet hook case is a perfect companion to the knitting needle roll I published a tutorial for a couple of weeks ago.

I'm using the same fabrics as they are both destined as a birthday present for my mum.

First, cut out your fabric.  You need:

1 x outer fabric 12 x 7.5 inches

1 x inner fabric 12 x 7.5 inches

1 x fusible fleece 11 3/4 x 7 1/4 inches

1 x flap outer 8.5 x 2 1/4 inches

1 x flap lining 8.5 x 2 1/4 inches

1 x pocket outer 12 x 4.5 inches

1 x pocket lining 12 x 4.5 inches

a 2 inch length of ribbon/braid/string

a button

I used plain white fabric for my pocket lining to prevent too much bulk as my fabric is home decor weight.  The inside of the pocket wont be seen.  Quilting weight fabric will work fine, you could also use denim or linen, whatever you fancy.

Place your pocket pieces and your flap pieces right sides together and pin.

For the pocket, sew one long edge only, flip so the fabrics are right sides out, press, topstitch if you want to.  I didn't.  Because I forgot, not for any scientific or design reason!

For the flap stitch one long edge and one short edge, depending on whether you want the flap on the left (like mine) or the right (not like mine).  The short edge that you sew up will be facing into the middle of the roll, not the edge.  Again flip, press, topstitch (or not).

I cut my fusible fleece a quarter of an inch smaller all round than the outer piece.  This just makes it easier to fuse in place without making a mess of your ironing board, iron or pressing cloth.  As it's only an 1/8 inch smaller along each edge it will still be caught in the seam allowance in case it becomes unstuck later.  I have had that happen to me, usually when I'm doing lots of turning, turning, unpicking, resewing, turning, turning, unpicking etc.  Fuse the fleece to your outer piece.

Place your outer piece right-side-up on a flat surface, put the pocket, also right side up on top, lining up the bottom and side raw edges.  Add the flap to the top corner with the two raw edges lined up with the left edge and the top edge.

Place your outer piece on top, right side down.  Fold your ribbon/braid/string/lock of hair in half and tuck inside your sandwich.  It needs to be loop-face inwards, raw edges sticking out about half an inch.  I positioned mine just above the pocket.

Pin the whole heap together.

Sew all the way round, leaving a 4 inch turning gap along one edge.  I would recommend doing this where there is only 2 layers of fabric - so on the upper edge towards the right, next to your flap.

Clip your corners, turn the whole thing inside out, making sure your pocket is on the inside and not the outside (cue loads of confusion as I can't figure out why my pocket is facing the wrong way... then realise you just need to turn it!), press the seams and top stitch if you want.  I didn't, not because I forgot this time but because the seams were so bulky that I would have made a right mess of it.

Slip stitch or ladder stitch your opening closed.  For some reason I thought you might like to see a picture of the back at this stage. 

Now you are going to create the pockets.  You can either do this by eye, use a quilting guide, or drawer the lines to be stitched on with a removable/fading/wash off pen.  I left a big gap on the right, about 4 inches I think, for scissors and "stuff", then I marked out a line 2 inches away, then 1 3/4, then 1 1/2 etc, down to 1 inch, then I alternated the rest of the lines between 1 inch and 5/8 inch to make room for different sized hooks.

Use either a contrasting thread or one that will blend in and stitch down each line, back tacking a little at either end.  I used my walking foot for this and didn't have any puckering problems as I'd had with the needle roll.

Quilt along all your lines, then snip the threads, unless you prefer the wild look as above.

Once again, I seemed to think you'd like to see the back...

Fold your case along one of the lines to the right, press the seam to help it fold.

Then fold the left side in along one of those lines until it looks nicely layered.  Find a button that will fit through your loop (you can plan this bit in advance, but who doesn't like the "damn, I don't have a matching button that fits" moment at times like this?  Strangely enough, I did have a matching button that fitted...)

Stick a pin where your button was to mark the spot, then sew your button in place.

Here's what it'll look like from the back.

And here's how it looks all folded up.

Much better than the last one!